اسعار لفائف حديدالتسليح ساده

اسعار لفائف حديدالتسليح الساده

التغييرات الأخيرة: 11:13 - 2023/5/21
x




صف القياسالمعادلهالنوع السعر (دلار) التغييرات (دلار)
15.5RST34حديدالتسليح الساده لفائف غير معروف
25.51006حديدالتسليح الساده لفائف560دلار لا توجد تغييرات
35.51008حديدالتسليح الساده لفائف560دلار لا توجد تغييرات
45.5building 3spbحديدالتسليح الساده لفائف غير معروف
56.51006حديدالتسليح الساده لفائف560دلار لا توجد تغييرات
66.51008حديدالتسليح الساده لفائف560دلار لا توجد تغييرات
76.5building 3spbحديدالتسليح الساده لفائف550دلار لا توجد تغييرات
881006حديدالتسليح الساده لفائف غير معروف
981008حديدالتسليح الساده لفائف غير معروف
108building 3spbحديدالتسليح الساده لفائف550دلار لا توجد تغييرات
11101008حديدالتسليح الساده لفائف غير معروف
12121008حديدالتسليح الساده لفائف غير معروف

SAE 1006 and SAE 1008 wires are also classified as low carbon steels. The parameters related to the hot rolling process for this group of wires are different from the previous samples due to their different chemical analysis and microstructure. The chemical analysis as well as the mechanical properties of these wires according to ASTM standard are presented in the table below.

SAE 1006 and SAE 1008 wires are also classified as low carbon steels. The parameters related to the hot rolling process for this group of wires are different from the previous samples due to their different chemical analysis and microstructure. Chemical analysis as well as mechanical properties of these wires according to ASTM standard are presented in the table below.

 

Steel grade c Mn P S Si Cr UTS(MPa) Elong RA
SAE1006 0.08 MAX 0.25-0.4 MAX0.04 0.05MAX 360-450 37-45 65-75
SAE1008 0.1 MAX 0.3-0.5 MAX0.04 0.05 MAX 370-425 35-43 65-75

 

RSt 34 and RSt 37 wires, which are in the category of low carbon steels, are produced in diameters of 5.5, 6.5 and 8 mm using hot rolling process. The main use of these wires in general applications such as structural applications O, packing wires, wires required for mesh and fence, production of nails, screws, rivets and…. Are offered to the market. The chemical composition of these products as well as their mechanical properties according to DIN standard are presented in the table below.

Steel grade c Mn P S Si Cr UTS(MPa) Elong RA
RST34 0.11-0.16 0.5-0.8 MAX0.04 0.05MAX 0.04-0.07 0.01-0.014 360-420 38-45 67-78
RST37 0.12-0.18 0.6-0.8 MAX0.04 0.05 MAX 0.4-0.7 0.01-0.014 400-470 35-43 65-75